Demonstration of an OT Project - 11

11.jpg (24732 bytes)

The tower is being held in a 4-jaw chuck. It has been center bored for the storage space and the faces
have been bored to accept the clock faces. The figured Masur birch has been sawn into veneer faces which
have been glued onto a mahogany core. The top has been milled with a mortise to accept a plug from the top
blackwood molding.

Back to Montage backdemo.jpg (4694 bytes)      Previous Next     Up to HomePage

World-Wide Web presentation Copyright 1999, James E. Harris. All Rights Reserved.
Last revised 12 February 2004.