Demonstration of an OT Project - 4

04.JPG (36734 bytes)

The bottom has been glued back on to the body and mounted into a dovetail chuck. The bottom dentil molding
pattern has been finished with blackwood glued into the slots. The drill frame is being used to cut the slots into
the blackwood underlayer for the top dentil molding. A scrap plug has been placed in the open end of the
body so as to bring the tailstock up to steady the workpiece.


Back to Montage backdemo.jpg (4694 bytes)      Previous Next     Up to HomePage


World-Wide Web presentation Copyright 1999, James E. Harris. All Rights Reserved.
Last revised 12 February 2004.